我的位置:
- 數字音視工程網/
- 產品中心/
- 產品詳情
愛思創Extron電子-立體聲功率放大器-XPA 1002
廠家報價:面議
產品狀態:(在產)
立體聲功率放大器- 100 瓦雙通道
產品品牌:
愛思創EXTRON
產品類別:
專業功放
地址:中國上海市松江區茸華路 686 號
電話:4000.398766、 021-3760 1568(聯系就說在DAV音視工程網上看到的)
廠商介紹: 愛思創電子(上海)有限公司(愛思創Extron中國)全球總部位于美國加州,是世界領先的專業視音頻系統集成產品的生產商。愛思創Extron產品主要包括視音頻控制系統、計算機視頻接口、切換器、矩陣切換器、分配放大器、音頻放大器、揚聲器、雙絞線和光纖設備、視頻圖像解析度轉換器、視音頻信號處理器、視音頻流媒... [詳細]
經銷商 | 聯系方式 | 價格 |
---|---|---|
愛思創Extron電子 | 4000.398766、 021-3760 1568 | 面議 |
XPA 1002, XPA 2001 (XTRA) Series | |||
Audio | |||
---|---|---|---|
Voltage gain | |||
XPA 1002 | 16x (24 dB) | ||
XPA 2001-70V | 57x (35 dB) | ||
XPA 2000-100V | 81x (38 dB) | ||
Stereo channel separation | >75 dB @ 1 kHz | ||
CMRR | 75 dB @ 1 kHz (typical) | ||
Audio input | |||
Number/signal type | 1 stereo or 2 mono, balanced/unbalanced | ||
Connectors | (1) 3.5 mm captive screw connector, 5 pole | ||
Impedance | >10k ohms unbalanced/balanced, DC coupled | ||
Nominal level | +4 dBu (1.23 Vrms), balanced | ||
Maximum level | +20 dBu (7.75 Vrms), balanced | ||
Input sensitivity | |||
XPA 1002 | +4 dBu (1.23 Vrms) | ||
XPA 2001-70V, XPA 2001-100V | +4 dBu (1.23 Vrms) if driven by one input -2 dBu (0.615 Vrms) if both inputs are summed |
||
|
|||
Audio output | |||
Number/signal type | |||
XPA 1002 | 1 stereo, 4- or 8-ohm direct | ||
XPA 2001-70V | 1 mono, 70 V line | ||
XPA 2001-100V | 1 mono, 100 V line | ||
Connectors | |||
XPA 1002 | (1) 5 mm screw lock captive screw connector, 4 pole | ||
XPA 2001-70V, XPA 2001-100V | (1) 5 mm screw lock captive screw connector, 2 pole | ||
|
|||
Load impedance | |||
XPA 1002 | 4 ohms minimum | ||
XPA 2001-70V | 25 ohms minimum | ||
XPA 2001-100V | 50 ohms minimum | ||
Amplifier type | Class D | ||
Output power | |||
XPA 1002 | 60 watts rms per channel, 8 ohms, 1 kHz, <0.05% THD 100 watts rms per channel, 4 ohms, 1 kHz, <0.05% THD |
||
XPA 2001-70V | 200 watts rms, 70 V, 1 kHz, <0.1% THD | ||
XPA 2001-100V | 200 watts rms, 100 V, 1 kHz, <0.1% THD | ||
Frequency response | 20 Hz to 20 kHz, ±1 dB | ||
THD + Noise | |||
XPA 1002 | 0.05% @ 20 Hz-20 kHz, 8 ohms, at 3 dB below clipping | ||
XPA 2001-70V, XPA 2001-100V | <0.1% @ 1 kHz at 3 dB below clipping | ||
S/N | |||
XPA 1002 | 105 dB, 20 Hz - 20 kHz, unweighted | ||
XPA 2001-70V, XPA 2001-100V | 100 dB, 20 Hz - 20 kHz, unweighted | ||
Damping factor | |||
XPA 1002 | >100 @ 8 ohms | ||
XPA 2001-70V | >100 @ 25 ohms | ||
XPA 2001-100V | >100 @ 50 ohms | ||
High pass filter | |||
XPA 2001-70V, XPA 2001-100V | 80 Hz, 12 dB per octave rolloff (switch selectable) | ||
Control/remote — amplifier | |||
Control port | (1) 3.5 mm captive screw connector, 5 pole | ||
Pin configurations | |||
DC volume control (analog) | Pin 1 = +10 VDC, 50 mA (max.), pin 2 = volume/mute (variable voltage), pin 3 = GND | ||
Volume control voltage range | 0 V (mute) to 10 V (maximum volume) | ||
Standby power control (contact closure) | Pin 4 = GND, pin 5 = standby | ||
General | |||
Power | 100 VAC to 240 VAC, 50-60 Hz, internal | ||
Typical | 26 watts (1/8 power [pink noise] at 8 ohms) | ||
Quiescent | |||
XPA 1002, XPA 2001-70V | 10 watts | ||
XPA 2001-100V | 12 watts | ||
Standby | <1 watt (triggered by contact closure or after 1 hour with no signal) | ||
Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
Cooling | Convection, no vents, with internal heat sinks | ||
Thermal dissipation | |||
Standby | <1 watt (3 BTU/hr) | ||
Idle | 10 watts (34 BTU/hr) | ||
1/8 power (pink noise) | 4 ohms (x2): 14 watts 8 ohms (x2): 14 watts (48 BTU/hr) 70 V (XPA 2001-70V): 14 watts (48 BTU/hr) |
||
Protection | Clip limiting, thermal, short circuit, DC output | ||
Indication | Limiter/Protect LED indicates the onset of clip limiting, thermal cycling, short circuit, or DC output protection | ||
Mounting | |||
Rack mount | Yes, with optional 1U rack shelf | ||
Enclosure type | Metal | ||
Enclosure dimensions | 1.7" H x 8.7" W x 9.5" D (1U high, half rack wide) (4.3 cm H x 22.1 cm W x 24.1 cm D) |
||
Product weight | 2.5 lbs (1.1 kg) | ||
Shipping weight | 5 lbs (3 kg) | ||
Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
Regulatory compliance | |||
Safety | CE, c-UL, UL UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release; meets UL 60065, IEC 60065, and BSEN 60065 for A/V equipment. |
||
EMI/EMC | CE, CISPR 22 Class B, C-tick, FCC Class B, ICES, VCCI Class B | ||
Environmental | Complies with the appropriate requirements of CEC, ENERGY STAR® (ENERGY STAR® qualified amplifier), EU code of conduct, RoHS, WEEE | ||
MTBF | 250,000 hours | ||
Warranty | 3 years parts and labor | ||
|
|||
|